tube expanders for boilers and
boiler accessories
114 series - boiler tube
expanders
Configuration: four
Parallel rollers with two flaring
rollers
Tube sizes covered: 2.0"OD up to
4.1/2"OD
The 114 series covers tube
sheets from 1/2" up to 2.5/8"
and different mandrels are
available including Short
series, Drum and Header.
features:
Overlapping rolls prevent ridging
of the tube.
Self retained rolls in the cage.
Compact design for use through
small hand holes, headers etc.
Use:
General purpose designed boiler
tube expander for flaring and
expanding tubes in fire tube
boilers, water walls, down comers,
economizers and air heater tubes.
This is an ideal expander if you
intend to manually bead the tubes
back to the tube sheet as this
expander will give the tube a 40
degree bevel.
Consult the PDF Specifications below to cross refer all data to the tube OD, wall thickness
and tube sheet thickness. Also, part numbers for spare mandrels and rollers can be found here.
If the PDF is two pages then the data has to be read across the two pages.
tube expanders for boilers and
boiler accessories
a series - boiler tube
expanders
PVLD-3000 Vacuum Tube Leak Detectors remain on sale at
the original sale price of $1395.00 USD$. We have kept
these important test kits at their 2013 price and intent to
keep it that way for the foreseeable future.
The
benefit of our vacuum kit is it comes totally
complete for tubes from 1/4" OD up to
3.0"OD. Unlike other systems where you have to purchase the extra seals and bodies.
Consult the PDF Specifications below to cross refer all data to the tube OD, wall thickness
and tube sheet thickness. Also, part numbers for spare mandrels and rollers can be found here.
If the PDF is two pages then the data has to be read across the two pages.
