|
Brushes
¼" - 1" I.D.
|
|
Nylon
Brushes
Used for
removing
soft scales
in ferrous
tubes
(carbon
steel,
stainless
steel) and
non-ferrous
tubes
(copper,
brass,
plastic,
etc.) and
for final
'finishing'
of tubes.
|
|
|
|
Stainless
Steel
Brushes
Used for
removing
soft and
light scale
deposits in
ferrous
tubes
(carbon
steel,
stainless
steel, etc.) |
|
|
|
Brass
Brushes
Used for
removing
soft and
light scale
deposits in
straight,
non-ferrous
tubes
(copper,
brass,
nickel and
their
alloyed
tubes). |
|
| Brush O.D. |
Nylon
Brush
|
Stainless Steel
|
Brass
Brush
|
Threading |
Coupling |
| inch |
mm |
| 1/4 |
6.4 |
N - 250 |
SS - 250 |
B - 250 |
8 - 32F |
P-1 (8 - 32M x 8 - 32M) |
| 5/16 |
7.9 |
N - 312 |
SS - 312 |
B - 312 |
8 - 32F |
P-1 (8 - 32M x 8 - 32M) |
| 3/8 |
9.5 |
N - 375 |
SS - 375 |
B - 375 |
12 - 24F |
P-2 (8 - 32M x 12 - 24M) |
| 7/16 |
11.1 |
N - 437 |
SS - 437 |
B - 437 |
1/4 - 28M |
- |
| 1/2 |
12.7 |
N - 500 |
SS - 500 |
B - 500 |
1/4 - 28M |
- |
| 9/16 |
14.3 |
N - 562 |
SS - 562 |
B - 562 |
1/4 - 28M |
- |
| 5/8 |
15.9 |
N - 625 |
SS - 625 |
B - 625 |
1/4 - 28M |
- |
| 11/16 |
17.5 |
N - 687 |
SS - 687 |
B - 687 |
1/4 - 28M |
- |
| 3/4 |
19.1 |
N - 750 |
SS - 750 |
B - 750 |
1/4 - 28M |
- |
| 13/16 |
20.6 |
N - 812 |
SS - 812 |
B - 812 |
1/4 - 28M |
- |
| 7/8 |
22.2 |
N - 875 |
SS - 875 |
B - 875 |
1/4 - 28M |
- |
| 15/16 |
23.8 |
N - 937 |
SS - 937 |
B - 937 |
1/4 - 28M |
- |
| 1 |
25.4 |
N - 1000 |
SS - 1000 |
B - 1000 |
1/4 - 28M |
- |
| Brushes should be ordered so that Brush O.D. is marginally less than tube I.D., for it to easily enter tube with deposit. |
|
|
|
|
Drill Tip
Double
Diameter
Brushes |
|
Drill Tip
Nylon Brush
Drill Tip
Brass Brush
|
|
These
Brushes are
used to
clean
internally
grooved
tubes. The
drill tip of
brushes
cleans
through hard
scale before
the brush
cleaning
action takes
over. The
large
diameter of
this brush
cleans into
the grooves
of the tubes
and the
small
diameter
into the
lands of the
tube's
rifling.
|
| Tube I.D. |
Drill Tip
Nylon Brush |
Drill Tip
Brass Brush |
| inch |
mm |
| 5/8 |
15.9 |
DTBN-625 |
DTBB-625 |
|
|
|
|
Brushes
1" & UP I.D.
|
|
Nylon
Brushes
Recommended
for removing
soft scales
in straight,
non-ferrous
tubes
(copper,
brass,
plastic,
etc.) and
ferrous
(stainless
steel,
carbon
steel) and
for final
'finishing'
of tubes.
Order brush
so that
brush O.D.
is
marginally
smaller than
tube I.D.
|
|
|
|
|
Stainless
Steel
Brushes
Recommended
for removing
soft and
light scale
deposits in
straight,
non-ferrous
tubes.
(carbon
steel,
stainless
steel, etc.)
Order brush
so that
brush O.D.
is
marginally
smaller than
tube I.D.
|
|
|
|
|
Brass
Brushes
Recommended
for removing
soft and
light scale
deposits in
straight,
non-ferrous
tubes. Order
brush so
that brush
O.D. is
marginally
smaller than
tube I.D.
|
|
| Brush O.D. |
Nylon Brush |
Brass Brush |
Stainless
Steel |
| inch |
mm |
| 1.1/4 |
31.7 |
N-1250 |
B-1250 |
SS-1250 |
| 1.1/2 |
38.1 |
N-1500 |
B-1500 |
SS-1500 |
| 1.3/4 |
44.5 |
N-1750 |
B-1750 |
SS-1750 |
| 2 |
51.0 |
N-2000 |
B-2000 |
SS-2000 |
| 2.1/4 |
57.1 |
N-2250 |
B-2250 |
SS-2250 |
| 2.1/2 |
63.5 |
N-2500 |
B-2500 |
SS-2500 |
| 2.3/4 |
70.0 |
N-2750 |
B-2750 |
SS-2750 |
| 3 |
76.2 |
N-3000 |
B-3000 |
SS-3000 |
| 3.1/4 |
82.6 |
N-3250 |
B-3250 |
SS-3250 |
| 3.1/2 |
89.0 |
N-3500 |
B-3500 |
SS-3500 |
| 3.3/4 |
95.2 |
N-3750 |
B-3750 |
SS-3750 |
| 4 |
101.6 |
N-4000 |
B-4000 |
SS-4000 |
|
|
|
|
Carbon
Steel
Brushes
Recommended
for removing
soft and
light scale
deposits in
straight,
ferrous
tubes. Order
brush so
that brush
O.D. is
marginally
smaller than
tube I.D.
|
|
|
|
|
Plastic
Brushes
Recommended
for removing
soft
deposits in
straight,
ferrous and
non-ferrous
tubes and
for final
'Finishing'
up of
cleaning in
hoses, tubes
and pipes.
Order brush
so that
brush O.D.
is
marginally
smaller than
tube I.D.
|
|
|
|
|
Drill Tip
Double
Diameter
Brushes |
|
Drill Tip
Nylon Brush
Drill Tip
Brass Brush
|
|
These
Brushes are
used to
clean
internally
grooved
tubes. The
drill tip of
brushes
cleans
through hard
scale before
the brush
cleaning
action takes
over. The
large
diameter of
this brush
cleans into
the grooves
of the tubes
and the
small
diameter
into the
lands of the
tube's
rifling.
|
| Tube I.D. |
Drill Tip
Nylon Brush |
Drill Tip
Brass Brush |
| inch |
mm |
| 1 |
25.4 |
DTBN-1000 |
DTBB-1000 |
| 1.1/4 |
31.7 |
DTBN-1250 |
DTBB-1250 |
Note :
Brushes over
1" O.D
require #
TCB-C
Coupling to
Connect to
PFS-750,
PFS-875 and
PFS-875-SS
shafts (One
coupling is
supplied
with each
brush
order.)
|
