Electric Tube Cleaning Systems

Canada's Electric Tube Cleaners are environment friendly, compact and easily manoeuvrable units to clean straight and curved tubes in Heat Exchangers, Condensers Boilers and other tubular apparatus.  They work by attaching a cleaning tool (to be determined on the type of deposit to be removed) to a Flexible Shaft.  The Electric Tube Cleaner Provides rotary motion to the flexible shaft which rotates the cleaning tool inside the tube.  If needed, water passes through the flexible shaft to aid flushing deposits out of the tube.  All Electric Tube Cleaners are supplied with forward direction foot switches.  Dual direction foot switches available on request for rifled tubes.

You will find all our systems and parts are interchangeable with other makes like Goodway etc.  As we are the manufacturers of the products we can make your system into any configuration required. 

Features:

• Water flushes through the shaft and helps remove deposits.
• Stainless Steel construction for harsh environments.
• Forward direction foot switch for ease of operation.
• Water flow is controlled by a solenoid therefore water only flows when the shaft is revolving.
• Easy change for varying shaft sizes and tool selection.

This is the workhorse of our range of Tube Cleaners for tubes from 1/4" to 2.5".  Consisting of the following:

• PTC - 40/60/75/150 Power unit in either 110v or 220v. 50Hz or 60 Hz.
• 2 x Flexible Shafts.
• 25 x Nylon Brushes.
• 2 x Buffing Tools.
• Buffing Tool Replacement Blades.
• Shaft Repair Tool.
• 4 x Drive End Couplings.
• 4 x Tool End Couplings.
• Flex Shaft Lubricator.
• 2 x Shaft Lubricant.

• PORTO Power unit in either 110v or 220v. 50Hz or 60 Hz.
• 2 x Flexible Shafts.
• 25 x Nylon Brushes.
• Shaft Repair Tool.
• 4 x Drive End Couplings.
• 4 x Tool End Couplings.
• Flex Shaft Lubricator.
• 2 x Shaft Lubricant.

• Compact, Light and Portable.

• Compatible to all Accessories.

• Ideal for use in tight spaces.