Portable Hand Tools, Welder Guns, Spray guns,
Short Blast Guns, Drifting Attachments in mines
and Quarry's, Jute and synthetic bag closing
machines, Gauges, Jigs and Fixtures, Pendant
Station, Switch Button of Hoists, in case of
de-oxidation, water washing of plating work with
raising and lowering of work etc.
Design
Overhead
Spring Balancers are specially designed to
free the operator from weight of the hand tools.
When properly balanced by adjusting spring
tension, the tools become almost weightless in
the hands of the operator, and can be moved up
and down with very little effort.
Safety Features
Exclusive Safety Features Introduced:
ENCLOSED
BODY
Spring Balancers from other
suppliers are supplied with opening
both in Body & Cover causing
accidental crunch of operator's
fingers between revolving drum and
the body of the Spring Balancers. To
prevent this, side windows on the
body and cover have been eliminated.
This would prevent industrial
accidents.
live video (Windows Media
Video - 2.9MB)
WIRE ARREST
MECHANISM (SWA SERIES) In
the unfortunate event of accidental
dislodging of the suspended weight,
breakage of bottom hook / wire rope,
spring tension will pull back the
wire rope, resulting in whipping
action likely to hurt personnel
around.
This mechanism will lock the last
revolving drum pulley & the wire
rope assembly will be stopped with
max. 20cm travel. This will prevent
the whipping of wire rope assembly &
avoided any injury to operator or
any personnel around.
live video (Windows Media Video
- 2.8MB)
BODY LINER In
order to prevent wear of the slot of
the Spring Balancer body, a split
type Nylon liner for wire rope has
been introduced in the new design
Spring Balancers.
This liner can be removed and
installed on site without any need
for dismantling of the wire rope.
This will prevent wear of the costly
body resulting in overall saving and
reduced down time of equipment.
live video (Windows Media Video
- 744KB)
EASY
ADJUSTMENT OF SPRING TENSION In
Spring Balancers from other
manufactures the worm gear box for
adjustment of Spring Tension worked
in the horizontal axis. Gear box
position has been rotated through 90
degrees so that spring tension
adjustment can be made by working in
vertical axis.
This will facilitate adjustment from
ground level without any need to
rise up to Spring Balancer hanging
level. This reduces down time,
facilities easy operation and
reduces the chance of any mishap
during an operator rising to the
level of the balancer.
live video (Windows Media Video
- 1.2MB)
WIRE
ROPE REPLACEMENT WITHOUT DISMANTLING
A small slot has been provided to
facilitate removal and
Re-installation of the wire rope
without any need for dismantling of
the Spring Balancers. This will
reduce the down time of the
equipment. This facility is not
available for long range Spring
Balancers.
live video (Windows Media Video
- 975KB)
CONTAINERISED
SPRING ASSEMBLY No
longer do you need to handle open
springs which are difficult and
dangerous to handle with sharp
edges. All springs are now supplied
in concealed containers for easy
replacement. With containerised
springs accidents are avoided during
maintenance and replacements of
springs.
live video (Windows Media Video
- 1.1MB)
Advantages of
Spring Balancer
(Load Balancer
/
Tool Balancer)
Increases Productivity
Balancers keep poised for action, minimize
motions required to bring tool from rest to
work positions.
Extends Tool Life
Balancers eliminate pick-up and lay down
wear and prevent damage from dropping.
Reduces Operator Fatigue
A Balancer makes the heaviest tool light as
a feather. Operator effort can be directed
to controlling the tool rather than
supporting.
No Need of Power
There is no need of electrical or mechanical
power.
Increases Safety
Balancers keep work area uncluttered to
reduce chances of damages of accessories or
accidental start up of tools during
handling.
Effective Use of Space
The working place being widely utilized, and
also to be cleaned up, the production is
smoothly carried out.
Contact us at
sales@tubetools.ca
Tel:
(613) 764-0572 or (613) 851-8334 Fax: (613) 764-3719
Live.com
Overhead
Spring Balancers are specially designed to
free the operator from weight of the hand tools.
When properly balanced by adjusting spring
tension, the tools become almost weightless in
the hands of the operator, and can be moved up
and down with very little effort.
Exclusive Safety Features Introduced:
live video
In
the unfortunate event of accidental
dislodging of the suspended weight,
breakage of bottom hook / wire rope,
spring tension will pull back the
wire rope, resulting in whipping
action likely to hurt personnel
around. 
In
order to prevent wear of the slot of
the Spring Balancer body, a split
type Nylon liner for wire rope has
been introduced in the new design
Spring Balancers. 
In
Spring Balancers from other
manufactures the worm gear box for
adjustment of Spring Tension worked
in the horizontal axis. Gear box
position has been rotated through 90
degrees so that spring tension
adjustment can be made by working in
vertical axis. 
No
longer do you need to handle open
springs which are difficult and
dangerous to handle with sharp
edges. All springs are now supplied
in concealed containers for easy
replacement. With containerised
springs accidents are avoided during
maintenance and replacements of
springs.
