Tube Drift - Knockout Tools.

Tube Drift for use with Pneumatic Hammer.

Used with pneumatic chipping hammer to knockout tube and stub from tube sheet.

Features:

Used with pneumatic chipping hammer to knock out tubes / tube stubs from tube sheet.
Tube Drift / Knockout Tool is available in 01 and 06 shanks as standard. 15 (Jumbo) shank available on request.
Suffix model number with tube gauge and shank when ordering. Example for 3/4” O.D. 16G, 06 shank, model number will be KT-750-16-06.
Tube Drift / Knockout Tool is available for mm tube sizes also. Please enquire.
Standard reach of this Tube Drift / Knockout Tool is 6”. Longer reaches are available.

Sizes Available	3/8" O.D. TO 4" O.D.
Models Available	KT-375 TO KT-4000

PDF here:

Adobe Reader Here:

Quick Links

Email: sales@tubetools.ca

Tube Expanders - Heat Exchangers
      * AN Series
      * 900 Series
      * 1300 Series
      * 800 Series
      * 800-5 Series
      * 1200 Series
      * 1200-5 Series
      * 8012 Series
      * Special Tube Expanders
      * Lube A Tube

Boiler Tube Expanders
      * Combination Beading Expanders
      * 114 Series
      * A Series
      * AF3 Series
      * AB Series
      * ABF3 Series
      * P-1000 Series
      * P-3000 Series
      * Lube A Tube
      * Boiler Tube Accessories

Tube Rolling Drives and Controls
      * Electric Tube Expansion Systems
            * TCW-09-PC Torque Controller
            * TCW-09 Torque Controller
            * Electric Rolling Drives
      * Pneumatic Tube Expansion Systems
            * Pneumatic Drivers
            * Right Angled Rolling Drives
      * Hydraulic Tube Expansion Systems
            * HYDEX
            * Hydraulic Thrust Expansion System

Installation Tools
      * Tube Sheet Hole Reamer - Morse taper
      * Tube Sheet Hole Reamer - Chucking
      * ST Series Serrating/Grooving Tool
      * NW Series Serrating/Grooving Tool
      * TEF Series Tube End Facer
      * FB Series Tube End Facer
      * FC Series Weld Removal
      * Flaring Tool
      * Tube Guides
      * Tube Sheet Hole Brushes
      * Vacuum Tube Leak Tester
      * Tube to Tube sheet Joint Testing Kit

Removal Tools
      * OTC Series Tube Cutters
      * ATP Series Tube Cutters
      * Pneumatic Lever Type Tube Cutters
      * PR-68 Series Tube Cutters
      * Master Tugger for Tube Removal
      * Automatic Hydraulic Tube Pulling System
      * Air Hydraulic Stub Puller
      * Manual Tube Puller
      * Tube Drift / Knockout Tools
      * Wall Reducers Tools
      * Collapsing Tools
      * Tube Plugs
      * Pine Jenny Style Tube Pulling Accessories

Sugar Mill Tooling
      * Sugar Mill Cleaning Units
      * Sugar Mill Brushes
      * Sugar Mill Cutters
      * Cutter Heads
      * Sugar Mill Tube Expanders

Tube Cleaning Section

Spring Balancers
    * SWF Series
    * SWA Series
    * SHB Series
    * Beam Trolleys
Torque Tooling
Impact Sockets
Turbine Tooling
Castellated Sockets
Slugging/Striking Wrenches
Structural Wrenches